Potassium Methyl Silicate Use: 5 Things
1. Clean the surface of the substrate before use, and remove the water, dust and other attachments from the base area to be treated. If there are cracks, fill them with putty or cement slurry. The surface of the substrate should be flat and solid without empty , Looseness and other phenomena.2. Before construction, slightly moisten the substrate surface for absorption.
3. Dilute to 3% or lower concentration when using. If you need to use a concentration higher than 3%, you must first verify the experiment. Using a high concentration will cause white residues to form on the waterproof surface.
4. It can be constructed with rags, sponges, brushes, rollers and sealed spray guns by soaking, spraying or painting. Can also be used in concrete.
5. Allow the treated surface to dry naturally after painting. Brush the surface a second time before the surface is dry. If it is used for the protection treatment of the surface of stone and ceramic tiles, use a soft cloth to wipe off the excess liquid after construction and do not dry it for at least 24h.
Hangzhou Silway New Material Technology Co.,Ltd . provides Potassium Methyl Siliconate , organosilicon chemicals, agricultural additives and penetrating organosilicon. A wide range of products are welcome.: https://www.silways.com/https://www.silways.com/
页:
[1]