急救!我的电脑....
电脑格式化不起来,一半就卡住不动了屏幕上出现Stop:0*00000001(0*00000002C,0*00000002,0*00000001,0*F4011129)
diver_irql_not_less_or_equal
address F4011129 base at F4010000,datastamp 3820e51-BOOTVID.dll
请问出什么问题了?怎么解决?谢谢大家^^ 找一个DOS 6.X 的盘使用Fdisk命令去重划一下分区,然后再格式化试试,祝好运
格式化重装
http://bootdisk.com/回复:急救!我的电脑....
最初由发布急救!我的电脑....
电脑格式化不起来,一半就卡住不动了
屏幕上出现Stop:0*00000001(0*00000002C,0*00000002,0*00000001,0*F4011129)
diver_irql_not_less_or_equal
address F4011129 base at F4010000,datastamp 3820e51-BOOTVID.dll
请问出什么问题了?怎么解决?谢谢大家^^
是不是磁盘有坏道了?
在dos下重新分区、格式化试试. 重新分区是个办法。
可能不是硬盘的问题1.换一个根内存2.更新BIOS 3.参考下文
To get further information about the error look in your Event viewer.Look in the System or Application folder.You can get to the Event Viewer via right click My Computer icon and select Manage.
Any errors logged in the Event Viewer can be expanded by double clicking on the error line.
Take any event error I.D. number and search for it on these sites.
http://www.microsoft.com/technet/treeview/default.asp?u...
http://www.eventid.net/events.asp
Also check any "Information" line that mentions "savedump" and you should find reference to "recovered from a bug check".This is the Stop Error that caused your problem.
You can also turn off "automatically restart after an error"so it will just halt at the fault and display the full Stop Error and blue screen.
Right-click My Computer, and then click Properties .
On the Advanced tab, click Settings under Startup and Recovery .
Click to clear the Automatically restart check box under System failure , and then click OK . The error message on a blue screen should remain on the screen so you can record the error information.
Is your Bios updated?
These errors may be caused by defective physical memory or incompatible software which caused a hardware driver or service request for data that was not in memory.
If the error occurred after installing a device driver or application, try using Safe Mode and removing the driver or program.
To check your RAM.
http://www.memtest86.com/
http://oca.microsoft.com/en/windiag.asp
To check your drivers.
HOW TO: Verify Unsigned Device Drivers in Windows XP
http://support.microsoft.com/support/kb/articles/q308/5...
To check conflicting software.
310353 - How to Perform a Clean Boot in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us...
316434 - HOW TO: Perform Advanced Clean-Boot Troubleshooting in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us...
Some general things to try.
See if System Restore will get you back to a restore point before your problem with Explorer.
Try Safe Mode (Do you have this problem in Safe Mode?). LAST KNOWN etc
Try running ChkDsk to check your drive for errors. Right click your Drive icon/ Properties/ Tools/ Error Checking.
Run the System File Checker program from the Run Box by typing.....Sfc /Scannow in it and have your XP CD handy.
If they don't work you could try repairing windows itself by running it over itself.You will lose all your windows updates but your files will be untouched.
How to Perform an In-Place Upgrade (Reinstallation) of Windows XP (Q315341)
http://support.microsoft.com/support/kb/articles/q315/3... low format 在DOS下用FDISK分一个小点的区,用500MB试一下。 如果可以的话FORMAT的话,应该是硬盘有问题
页:
[1]