vbuzzer

qbrian · 发表于 2014-2-24 00:00:07

我的vbvzzer电话不工作，谁帮我解决，我付费。快!快!快!

小牧 · 发表于 2014-2-24 00:26:14

网络电话不工作的原因有很多的，你至少说得具体点吧。

qbrian · 发表于 2014-2-24 11:26:41

电话打不出，打不进。没有拨号音。We have completed several tests and have detected the following;
VBuzzer servers are not receiving a signal from VBuzzer adapter.
Please unplug your AC power adapter from the VBuzzer adapter, wait 2 minutes, replug the AC power adapter and this will active as a reset.
Please try your call again.
If that doesn’t correct the problem, please change the proxy from vbuzzer.com:80 to vbuzzer.com:5060.
Please change the SIP Port from 80 to 5060 & the PROXY from vbuzzer.com:80 to vbuzzer.com:5060.
如何设置

qbrian · 发表于 2014-2-24 11:27:56

回复 2# 小牧

We have completed several tests and have detected the following;
VBuzzer servers are not receiving a signal from VBuzzer adapter.
Please unplug your AC power adapter from the VBuzzer adapter, wait 2 minutes, replug the AC power adapter and this will active as a reset.
Please try your call again.
If that doesn’t correct the problem, please change the proxy from vbuzzer.com:80 to vbuzzer.com:5060.

qbrian · 发表于 2014-2-24 11:28:33

回复 2# 小牧

We have completed several tests and have detected the following;
VBuzzer servers are not receiving a signal from VBuzzer adapter.
Please unplug your AC power adapter from the VBuzzer adapter, wait 2 minutes, replug the AC power adapter and this will active as a reset.
Please try your call again.
If that doesn’t correct the problem, please change the proxy from vbuzzer.com:80 to vbuzzer.com:5060.

电话打不出，打不进。没有拨号音。如何设置

qbrian · 发表于 2014-2-24 11:29:05

电话打不出，打不进。没有拨号音。We have completed several tests and have detected the following;
VBuzzer servers are not receiving a signal from VBuzzer adapter.
Please unplug your AC power adapter from the VBuzzer adapter, wait 2 minutes, replug the AC power adapter and this will active as a reset.
Please try your call again.
If that doesn’t correct the problem, please change the proxy from vbuzzer.com:80 to vbuzzer.com:5060.
Please change the SIP Port from 80 to 5060 & the PROXY from vbuzzer.com:80 to vbuzzer.com:5060.
如何设置