• 实时天气:多伦多 13°
    温度感觉: 13°
  • 实时天气:温哥华 10°
    温度感觉:
  • 实时天气:卡加利 16°
    温度感觉: 14°
  • 实时天气:蒙特利尔 16°
    温度感觉: 15°
  • 实时天气:温尼伯
    温度感觉:
查看: 2996|回复: 11
打印 上一主题 下一主题

IE又弹不出新窗口了

跳转到指定楼层
楼主
发表于 2004-4-28 17:09:13 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
我重装了系统,是WINDOWS 2000,我把IE升级到了6。0,开始还好好的,可好景不长,才不过3天而已,今天IE就打不开新窗口了。请问这是怎么回事?重装IE有帮助吗?
沙发
发表于 2004-4-29 13:43:13 | 只看该作者
你有装WIN2000的SP2,SP3和SP4吗?
建议装个病毒软件.
板凳
 楼主| 发表于 2004-4-29 14:25:03 | 只看该作者
WIN2000的?好象没有.我不知道.有用吗?
地板
发表于 2004-4-30 08:53:18 | 只看该作者
The problem is not from Windows but the internet service provider. If it happens again, you can just restart your computer to solve your problem. This is temp solution. You have to contact with the internet provider to solve this problem thoroughly.

Good Luck!
5#
 楼主| 发表于 2004-4-30 11:48:08 | 只看该作者
不行呀,每次开机都不行.我已经不知道重起了多少回了.
6#
发表于 2004-5-6 00:17:49 | 只看该作者
碰见过,重装IE吧
7#
 楼主| 发表于 2004-5-7 20:19:33 | 只看该作者
我重装了电脑才好.
8#
发表于 2004-5-13 03:40:30 | 只看该作者
IE浏览器不能打开新窗口的解决办法

--------------------------------------------------------------------------------
作者:系统  日期:2003-09-02  阅读:315  



最近发现我的IE不能打开新窗口,具体表现形式是:用鼠标左键点击超链接没有反应,用鼠标右键点击超链接,在弹出的菜单中选择“在新窗口打开”也没有动静。怎么办呢?经过查找试验,终于找到了解决方法:

  1、在“开始”菜单中打开“运行”窗口,在其中输入“regsvr32 actxprxy.dll”,然后“确定”,接着会出现一个信息对话框“DllRegisterServer in actxprxy.dll succee
ded”,再次点击“确定”。

  2、再次打开“运行”窗口,输入“regsvr32 shdocvw.dll”,“确定”后在出现的信息对话框中点击“确定”。

  3、重新启动Windows,运行IE,随便打开一个网页,点击一个超链接,你会发现IE又能打开新窗口。再试试用鼠标右键选择“在新窗口打开”,问题解决。

(中国电脑教育报 文/王海星)
9#
发表于 2004-5-13 13:17:37 | 只看该作者
如果上面的还不行,就再试试下面的:

regsvr32 oleaut32.dll
regsvr32 shdocvw.dll
regsvr32 actxproxy.dll
regsvr32 mshtml.dll
regsvr32 pdm32.dll
10#
发表于 2004-5-13 13:20:44 | 只看该作者

RESOLUTION from Microsoft

To resolve this problem in Internet Explorer, follow these steps:
Quit all programs that are running.
Click Start, and then click Run.
Type regsvr32 urlmon.dll, and then click OK.
When you receive the "DllRegisterServer in urlmon.dll succeeded" message, click OK.
If this does not resolve the problem, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the file names below):
Shdocvw.dll
Msjava.dll
Actxprxy.dll
Oleaut32.dll
Mshtml.dll
Browseui.dll
Shell32.dll (Windows XP and Windows 2000 only)
If the problem is still not resolved, verify that the following registry values are present and correct:
HKLMSOFTWAREClassesInterface{00020400-0000-0000-C000-000000000046}
Name: (Default)
Value: IDispatch
HKLMSOFTWAREClassesInterface{00020400-0000-0000-C000-000000000046}ProxyStubClsid
Name: (Default)
Value: {00020420-0000-0000-C000-000000000046}
HKLMSOFTWAREClassesInterface{00020400-0000-0000-C000-000000000046}ProxyStubClsid32
Name: (Default)
Value: {00020420-0000-0000-C000-000000000046}

If the problem is still not resolved, reinstall Internet Explorer. If you are using the version of Internet Explorer that is included with your operating system, reinstall or repair your operating system.
11#
 楼主| 发表于 2004-5-20 18:17:55 | 只看该作者
不得已重装了好几次系统,现在总算恢复正常了。
多谢诸位啦。
您需要登录后才可以回帖 登录 | 免费注册

本版积分规则

快速回复 返回顶部 返回列表